What is the best waterproofing method for basement walls? Seepage reaching the basement is not a good sign. Usually, there are two possible ways the seepage will spread in a home. Either it comes from the roof above or from the basement. The alarming fact about the seepage is that it can spread mold and eventually become difficult to find the source. The following steps can devise a powerful method to track down the issue and improve it from its core.
Find the Core Issue
If you just start noticing the wet patches or mold on your basement wall, the problem would have started long ago and it just starting showing up. One of the most evident structural issues that facilitate the moisture is the cracks in the wall. Usually, the water or moisture use these cracks or porosity of material to travel. A crack-less wall is the most effective defense against unusual moisture because the porosity in the cracks is higher than the outer surface of the walls.
Improve the Drainage System
By improving the drainage, you saved your basement walls from damage, but the core issue might still be at large. Make sure you keep your gutters clean all the time and check the underground piping for possible damages as well.
Make Sure Ventilated Air Can Reach your Basement
Basements are quite cooler as compared to the other parts of a building. The sunlight doesn’t touch that deep in a building, and some have poor ventilation as well. To to avoid moisture gathering in your walls, make sure that ventilated air can reach your basement.
Don’t forget that a professional structural expert can be hired for help. The initial moisture problem in walls can be tackled with a personal effort, but for complex issues, you should talk to a professional.